Replace the `CustomCursorBuilder` with the `CustomCursorSource` and
perform the loading of the cursor via the
`EventLoop::create_custom_cursor` instead of passing it to the builder
itself.
This follows the `EventLoop::create_window` API.
Creating window when event loop is not running generally doesn't work,
since a bunch of events and sync OS requests can't be processed. This
is also an issue on e.g. Android, since window can't be created outside
event loop easily.
Thus deprecate the window creation when event loop is not running,
as well as other resource creation to running event loop.
Given that all the examples use the bad pattern of creating the window
when event loop is not running and also most example existence is
questionable, since they show single thing and the majority of their
code is window/event loop initialization, they wore merged into
a single example 'window.rs' example that showcases very simple
application using winit.
Fixes#3399.
Mainly fix typos in comments, but also some minor code changes:
* Rename `apply_on_poiner` to `apply_on_pointer`.
* Rename `ImeState::Commited` to `ImeState::Committed`
* Correct `cfg_attr` usage: `wayland_platfrom` -> `wayland_platform`.
This was supposed to be rolled out with the rwh v0.6 update, but it
was left behind for some reason. I've added this type back.
Signed-off-by: John Nunley <dev@notgull.net>
Previously we had a sort of artificial split between these, but both were accessing each other's state, since it's really the same state!
It was especially difficult to follow what happens to the fullscreen state.
So instead, we basically merge the window and the delegate files.
This does unfortunately screw a bit with the git history, apologies to whoever reads this in the future!
* Use icrate's window structs and enums
* Properly implement protocols
* Use icrate's NSWindow
We were previously using undocumented methods on `NSWindowTabGroup`
* Use icrate's NSApplication
And clean up some doc comments regarding NSApplication
* Refactor winit-specific cursor logic out of appkit module
* Add relevant AppKit features that we depend on
* Use icrate's NSImageRep and NSBitmapImageRep
* Use icrate's NSImage
* Use icrate's NSCursor
* Use icrate's NSAppearance
* Use icrate's NSScreen
* Use icrate's NSButton
* Use icrate's NSAppKitVersionNumber
* Use icrate's NSTextInputContext
* Use icrate's NSColor
* Use icrate's NSEvent
* Use icrate's NSMenu and NSMenuItem
* Use icrate's NSPasteboard
* Use icrate's NSResponder
* Use icrate's NSTextInputClient
* Use icrate's NSView
* Make Linux platforms less dependent on the root monitor handle
* Add various functions to the Wayland platform to reduce cfgs
* Don't use a cfg in listen_device_events
* Don't use a cfg in set_content_protected
* Fix instance of a target_os cfg
* macOS & iOS: Refactor EventWrapper
* macOS & iOS: Make EventLoopWindowTarget independent of the user event
* iOS: Use MainThreadMarker instead of marking functions unsafe
* Make iOS thread safe
Inner panics could make it hard to trouble shoot the issues and for some
users it's not desirable.
The inner panics were left only when they are used to `assert!` during
development.
This reverts commit 9f91bc413fe20618bd7090829832bb074aab15c3 which
reverted the original patch which was merged without a proper review.
Fixes: #500.
Inner panics could make it hard to trouble shoot the issues and for some
users ints not desirable.
The inner panics were left only when they are used to `assert!` during
development.
There's no need to force the static on the users, given that internally
some backends were not using static in the first place.
Co-authored-by: daxpedda <daxpedda@gmail.com>
Lifetimes don't work nicely when dealing with multithreaded environments
in the current design of the existing winit's event handling model, so
remove it in favor of `InnerSizeWriter` fences passed to client, so they
could try to update the size.
Fixes#1387.
This renames all internal implementations of pump_events_with_timeout
to pump_events and makes them public.
Since all platforms that support pump_events support timeouts there's
no need to have a separate API.
This layers pump_events on a pump_events_with_timeout API, like we have
for Linux and Android.
This is just an internal implementation detail for now but we could
consider making pump_events_with_timeout public, or just making it so
that pump_events() takes the timeout argument.
This re-works the portable `run()` API that consumes the `EventLoop` and
runs the loop on the calling thread until the app exits.
This can be supported across _all_ platforms and compared to the
previous `run() -> !` API is now able to return a `Result` status on all
platforms except iOS and Web. Fixes: #2709
By moving away from `run() -> !` we stop calling `std::process::exit()`
internally as a means to kill the process without returning which means
it's possible to return an exit status and applications can return from
their `main()` function normally.
This also fixes Android support where an Activity runs in a thread but
we can't assume to have full ownership of the process (other services
could be running in separate threads).
Additionally all examples have generally been updated so that `main()`
returns a `Result` from `run()`
Fixes: #2709
The implementation of `pump_events` essentially works by hooking into the
`RunLoopObserver` and requesting that the app should be stopped the next time
that the `RunLoop` prepares to wait for new events.
Originally I had thought I would poke the `CFRunLoop` for the app directly and
I was originally going to implement `pump_events` based on a timeout which I'd
seen SDL doing.
I found that `[NSApp run]` wasn't actually being stopped by asking the RunLoop
to stop directly and inferred that `NSApp run` will actually catch this and
re-start the loop.
Hooking into the observer and calling `[NSApp stop]` actually seems like a
better solution that doesn't need a hacky constant timeout.
The end result is quite similar to what happens with existing apps that
call `run_return` inside an external loop and cause the loop to exit for
each iteration (that also results in the `NSApp` stopping each
iteration).
Use the definitions that `core_foundation` exposes (almost the same, except `CFRunLoopSourceContext::perform` is not nullable, so we account for that as well).
* Remove UnownedWindow::inner_rect
* Refactor custom view to use much less `unsafe`
The compiler fence is safe to get rid of now since `interpretKeyEvents` takes `&mut self`
* Refactor Window to use much less unsafe
* Refactor NSApplication usage to have much less unsafe
* Remove cocoa dependency
* Enable `deny(unsafe_op_in_unsafe_fn)` on macOS
Also re-enable clippy `let_unit_value` lint
* Remove #[macro_use] on macOS
* Refactor window delegate to use much less unsafe
* Begin abstraction over AppKit
* Clean up NSApplication delegate declaration
* Clean up NSApplication override declaration
* Clean up NSWindow delegate declaration
* Clean up NSWindow override declaration
* Clean up NSView delegate declaration
This should force the use of system libraries for Fontconfig
and freetype instead of building them with cmake if missing.
This also fixes compilation failures on nightly.
Fixes#2373.
This commit adds an `EventLoopBuilder` struct to simplify event loop
customization and providing options to it upon creation. It also
deprecates the use of `EventLoop::with_user_event` in favor of the same
method on new builder, and replaces old platforms specific extension
traits with the new ones on the `EventLoopBuilder`.
* Add exit code to control flow and impl on linux
* Fix examples to have an exit code
* Fix doc examples to use an exit code
* Improve documentation wording on the exit code
* Add exit code example
* Add exit code on windows
* Change i32 as exit code to u8
This avoids nasty surprises with negative numbers on some unix-alikes
due to two's complement.
* Fix android usages of ControlFlow::Exit
* Fix ios usages of ControlFlow::Exit
* Fix web usages of ControlFlow::Exit
* Add macos exit code
* Add changelog note
* Document exit code on display server disconnection
* Revert "Change i32 as exit code to u8"
This reverts commit f88fba0253b45de6a2ac0c3cbcf01f50503c9396.
* Change Exit to ExitWithCode and make an Exit const
* Revert "Add exit code example"
This reverts commit fbd3d03de9c2d7516c7a63da489c99f498b710df.
* Revert "Fix doc examples to use an exit code"
This reverts commit daabcdf9ef9e16acad715c094ae442529e39fcbc.
* Revert "Fix examples to have an exit code"
This reverts commit 0df486896b8d106acf65ba83c45cc88d60d228e1.
* Fix unix-alike to use ExitWithCode instead of Exit
* Fix windows to use ExitWithCode rather than Exit
* Silence warning about non-uppercase Exit const
* Refactor exit code handling
* Fix macos Exit usage and recover original semantic
* Fix ios to use ExitWithCode instead of Exit
* Update documentation to reflect ExitWithCode
* Fix web to use ExitWithCode when needed, not Exit
* Fix android to use ExitWithCode, not Exit
* Apply documenation nits
* Apply even more documentation nits
* Move change in CHANGELOG.md under "Unreleased"
* Try to use OS error code as exit code on wayland
* Drop the event callback before exiting
* Update the changelog
* Apply suggestion from review
Co-authored-by: Markus Røyset <maroider@protonmail.com>
* Apply review suggestions
Co-authored-by: Markus Røyset <maroider@protonmail.com>
* Require setting the activation policy on the event loop
* Run cargo fmt
* Update changelog
* Fixes and tweaks from review
* Correct comment in app_state.rs
Co-authored-by: Mads Marquart <mads@marquart.dk>
