winit's notion of "focus" is very simple; you're either focused or not.
However, Windows has both notions of focused window and active window
and paying attention only to WM_SETFOCUS/WM_KILLFOCUS can cause a window
to believe the user is interacting with it when they're not. (this
manifests when a user switches to another application between when a
winit application starts and it creates its first window)
This commit brings new Ime event to account for preedit state of input
method, also adding `Window::set_ime_allowed` to toggle IME input on
the particular window.
This commit implements API as designed in #1497 for desktop platforms.
Co-authored-by: Artur Kovacs <kovacs.artur.barnabas@gmail.com>
Co-authored-by: Markus Siglreithmaier <m.siglreith@gmail.com>
Co-authored-by: Murarth <murarth@gmail.com>
Co-authored-by: Yusuke Kominami <yukke.konan@gmail.com>
Co-authored-by: moko256 <koutaro.mo@gmail.com>
* Restore the ability to have fully transparent windows on Windows
Besides its original purpose, commit 6343059b "Fix Windows transparency
behavior to support fully-opaque regions (#1621)" also included some
changes considered cleanups, one of them was:
* Remove the `CreateRectRgn` call, since we want the entire window's region to
have blur behind it, and `DwnEnableBlurBehindWindow` does that by default.
But the original code actually disabled the blur effect for the whole
window by creating an empty region for it, because that allows for the
window to be truely fully transparent. With the blur effect in place,
the areas meant to be transparent either blur the things behind it
(until Windows 8) or are darkened (since Windows 8). This also means
that on Windows 8 and newer, the resulting colors are darker than
intended in translucent areas when the blur effect is enabled.
This restores the behaviour from winit <0.24 and fixes#1814.
Arguably, one might want to expose the ability to control the blur
region, but that is outside the scope of this commit.
* Remove useless WS_EX_LAYERED from transparent windows on Windows
`WS_EX_LAYERED` is not supposed to be used in combination with
`CS_OWNDC`. In winit, as it is currently used, `WS_EX_LAYERED` actually
has no effect at all. The only relevant call is to
`SetLayeredWindowAttributes`, which is required to make the window
visible at all with `WS_EX_LAYERED` set, but is called with full
opacity, i.e. there's no transparency involved at all.
The actual transparency is already achieved by using
`DwmEnableBlurBehindWindow`, so `WS_EX_LAYERED` and the call to
`SetLayeredWindowAttributes` can both be removed.
* On Windows, fix request_redraw() related panics
These panics were introduced by 6a330a2894
Fixes https://github.com/rust-windowing/winit/issues/1391
Fixes https://github.com/rust-windowing/winit/issues/1400
Fixes https://github.com/rust-windowing/winit/issues/1466
Probably fixes other related issues
See https://github.com/rust-windowing/winit/issues/1429
* On Windows, replace all calls to UpdateWindow by calls to InvalidateRgn
This avoids directly sending a WM_PAINT message,
which might cause buffering of RedrawRequested events.
We don't want to buffer RedrawRequested events because:
- we wan't to handle RedrawRequested during processing of WM_PAINT messages
- state transitionning is broken when handling buffered RedrawRequested events
Fixes https://github.com/rust-windowing/winit/issues/1469
* On Windows, panic if we are trying to buffer a RedrawRequested event
* On Windows, move modal loop jumpstart to set_modal_loop() method
This fixes a panic.
Note that the WM_PAINT event is now sent to the modal_redraw_method
which is more correct and avoids an unecessary redraw of the window.
Relates to but does does not fix https://github.com/rust-windowing/winit/issues/1484
* On Window, filter by paint messages when draining paint messages
This seems to prevent PeekMessage from dispatching unrelated sent messages
* Change recently added panic/assert calls with warn calls
This makes the code less panicky...
And actually, winit's Windoww callbacks should not panic
because the panic will unwind into Windows code.
It is currently undefined behavior to unwind from Rust code into foreign code.
See https://doc.rust-lang.org/std/panic/fn.catch_unwind.html
* add comments to clarify WM_PAINT handling in non modal loop
* made redraw_events_cleared more explicit and more comments
* Move `ModifiersChanged` variant to `WindowEvent`
* macos: Fix flags_changed for ModifiersChanged variant move
I haven't look too deep at what this does internally, but at least
cargo-check is fully happy now. :)
Signed-off-by: Kristofer Rye <kristofer.rye@gmail.com>
* macos: Fire a ModifiersChanged event on window_did_resign_key
From debugging, I determined that macOS' emission of a flagsChanged
around window switching is inconsistent. It is fair to assume, I think,
that when the user switches windows, they do not expect their former
modifiers state to remain effective; so I think it's best to clear that
state by sending a ModifiersChanged(ModifiersState::empty()).
Signed-off-by: Kristofer Rye <kristofer.rye@gmail.com>
* windows: Fix build
I don't know enough about the code to implement the fix as it is done on
this branch, but this commit at least fixes the build.
Signed-off-by: Kristofer Rye <kristofer.rye@gmail.com>
* windows: Send ModifiersChanged(ModifiersState::empty) on KILLFOCUS
Very similar to the changes made in [1], as focus is lost, send an event
to the window indicating that the modifiers have been released.
It's unclear to me (without a Windows device to test this on) whether
this is necessary, but it certainly ensures that unfocused windows will
have at least received this event, which is an improvement.
[1]: f79f21641a31da3e4039d41be89047cdcc6028f7
Signed-off-by: Kristofer Rye <kristofer.rye@gmail.com>
* macos: Add a hook to update stale modifiers
Sometimes, `ViewState` and `event` might have different values for their
stored `modifiers` flags. These are internally stored as a bitmask in
the latter and an enum in the former.
We can check to see if they differ, and if they do, automatically
dispatch an event to update consumers of modifier state as well as the
stored `state.modifiers`. That's what the hook does.
This hook is then called in the key_down, mouse_entered, mouse_exited,
mouse_click, scroll_wheel, and pressure_change_with_event callbacks,
which each will contain updated modifiers.
Signed-off-by: Kristofer Rye <kristofer.rye@gmail.com>
* Only call event_mods once when determining whether to update state
Signed-off-by: Kristofer Rye <kristofer.rye@gmail.com>
* flags_changed: Memoize window_id collection
Signed-off-by: Kristofer Rye <kristofer.rye@gmail.com>
* window_did_resign_key: Remove synthetic ModifiersChanged event
We no longer need to emit this event, since we are checking the state of
our modifiers before emitting most other events.
Signed-off-by: Kristofer Rye <kristofer.rye@gmail.com>
* mouse_motion: Add a call to update_potentially_stale_modifiers
Now, cover all events (that I can think of, at least) where stale
modifiers might affect how user programs behave. Effectively, every
human-interface event (keypress, mouse click, keydown, etc.) will cause
a ModifiersChanged event to be fired if something has changed.
Signed-off-by: Kristofer Rye <kristofer.rye@gmail.com>
* key_up: Add a call to update_potentially_stale_modifiers
We also want to make sure modifiers state is synchronized here, too.
Signed-off-by: Kristofer Rye <kristofer.rye@gmail.com>
* mouse_motion: Remove update_potentially_stale_modifiers invocation
Signed-off-by: Kristofer Rye <kristofer.rye@gmail.com>
* Retry CI
* ViewState: Promote visibility of modifiers to the macos impl
This is so that we can interact with the ViewState directly from the
WindowDelegate.
Signed-off-by: Kristofer Rye <kristofer.rye@gmail.com>
* window_delegate: Synthetically set modifiers state to empty on resignKey
This logic is implemented similarly on other platforms, so we wish to
regain parity here. Originally this behavior was implemented to always
fire an event with ModifiersState::empty(), but that was not the best as
it was not necessarily correct and could be a duplicate event.
This solution is perhaps the most elegant possible to implement the
desired behavior of sending a synthetic empty modifiers event when a
window loses focus, trading some safety for interoperation between the
NSWindowDelegate and the NSView (as the objc runtime must now be
consulted in order to acquire access to the ViewState which is "owned"
by the NSView).
Signed-off-by: Kristofer Rye <kristofer.rye@gmail.com>
* Check for modifiers change in window events
* Fix modifier changed on macOS
Since the `mouse_entered` function was generating a mouse motion, which
updates the modifier state, a modifiers changed event was incorrectly
generated.
The updating of the modifier state has also been changed to make sure it
consistently happens before events that have a modifier state attached
to it, without happening on any other event.
This of course means that no `CursorMoved` event is generated anymore
when the user enters the window without it being focused, however I'd
say that is consistent with how winit should behave.
* Fix unused variable warning
* Move changelog entry into `Unreleased` section
Co-authored-by: Freya Gentz <zegentzy@protonmail.com>
Co-authored-by: Kristofer Rye <kristofer.rye@gmail.com>
Co-authored-by: Christian Duerr <contact@christianduerr.com>
* Modify DPI API publicly and on Windows
* Add generic Position and make dpi creation functions const
* Make examples work
* Fix fullscreen windows not appearing
* Replace Logical coordinates in window events with Physical coordinates
* Update HiDpiFactorChanged
* Document to_static
* Add support for Windows Dark Mode
* Add is_dark_mode() getter to WindowExtWindows
* Add WindowEvent::DarkModeChanged
* Add support for dark mode in Windows 10 builds > 18362
* Change strategy for querying windows 10 build version
* Drop window state before sending event
Co-Authored-By: daxpedda <daxpedda@gmail.com>
* Change implementation of windows dark mode support
* Expand supported range of windows 10 versions with dark mode
* Use get_function! macro where possible
* Minor style fixes
* Improve documentation for ThemeChanged
* Use `as` conversion for `BOOL`
* Correct CHANGELOG entry for dark mode
Co-authored-by: daxpedda <daxpedda@gmail.com>
Co-authored-by: Osspial <osspial@gmail.com>
* Add exclusive fullscreen mode
* Add `WindowExtMacOS::set_fullscreen_presentation_options`
* Capture display for exclusive fullscreen on macOS
* Fix applying video mode on macOS after a fullscreen cycle
* Fix compilation on iOS
* Set monitor appropriately for fullscreen on macOS
* Fix exclusive to borderless fullscreen transitions on macOS
* Fix borderless to exclusive fullscreen transition on macOS
* Sort video modes on Windows
* Fix fullscreen issues on Windows
* Fix video mode changes during exclusive fullscreen on Windows
* Add video mode sorting for macOS and iOS
* Fix monitor `ns_screen` returning `None` after video mode change
* Fix "multithreaded" example on macOS
* Restore video mode upon closing an exclusive fullscreen window
* Fix "multithreaded" example closing multiple windows at once
* Fix compilation on Linux
* Update FEATURES.md
* Don't care about logical monitor groups on X11
* Add exclusive fullscreen for X11
* Update FEATURES.md
* Fix transitions between exclusive and borderless fullscreen on X11
* Update CHANGELOG.md
* Document that Wayland doesn't support exclusive fullscreen
* Replace core-graphics display mode bindings on macOS
* Use `panic!()` instead of `unreachable!()` in "fullscreen" example
* Fix fullscreen "always on top" flag on Windows
* Track current monitor for fullscreen in "multithreaded" example
* Fix exclusive fullscreen sometimes not positioning window properly
* Format
* More formatting and fix CI issues
* Fix formatting
* Fix changelog formatting
* Fix issues with redraw_requested when called during EventsCleared
* Format
* Fix event dispatch after RedrawRequested but before EventsCleared
This could happen if the event queue was cleared, we processed WM_PAINT,
but the event queue got re-filled before we checked to see it was empty.
* Fix paint ordering issues when resizing window
* Format
* Format everything and add rustfmt to travis
* Remove extern crate winit from examples and add force_multiline_blocks
* Format the code properly
* Fix inconsistent period in PULL_REQUEST_TEMPLATE.md
* Only run rustfmt on nightly
* Travis fixings
* First name consistency pass. More to come!
* Remove multitouch variable (hopefully this compiles!)
* Remove CreationError::NotSupported
* Add new error handling types
* Remove `get_` prefix from getters.
This is as per the Rust naming conventions recommended in
https://rust-lang-nursery.github.io/api-guidelines/naming.html#getter-names-follow-rust-convention-c-getter
* Make changes to Window position and size function signatures
* Remove CreationError in favor of OsError
* Begin updating iOS backend
* Change MonitorHandle::outer_position to just position
* Fix build on Windows and Linux
* Add Display and Error implementations to Error types
* Attempt to fix iOS build.
I can't actually check that this works since I can't cross-compile to
iOS on a Windows machine (thanks apple :/) but this should be one of
several commits to get it working.
* Attempt to fix iOS errors, and muck up Travis to make debugging easier
* More iOS fixins
* Add Debug and Display impls to OsError
* Fix Display impl
* Fix unused code warnings and travis
* Rename set_ime_spot to set_ime_position
* Add CHANGELOG entry
* Rename set_cursor to set_cursor_icon and MouseCursor to CursorIcon
* Organize Window functions into multiple, categorized impls
* Improve clarity of function ordering and docs in EventLoop
* Rename EventsLoop and associated types to EventLoop
* Rename WindowEvent::Refresh to WindowEvent::Redraw
* Remove second thread from win32 backend
* Update run_forever to hijack thread
* Replace windows Mutex with parking_lot Mutex
* Implement new ControlFlow and associated events
* Add StartCause::Init support, timer example
* Add ability to send custom user events
* Fully invert windows control flow so win32 calls into winit's callback
* Add request_redraw
* Rename platform to platform_impl
* Rename os to platform, add Ext trait postfixes
* Add platform::desktop module with EventLoopExt::run_return
* Re-organize into module structure
* Improve documentation
* Small changes to examples
* Improve docs for run and run_return
* Change instances of "events_loop" to "event_loop"
* Rename MonitorId to MonitorHandle
* Add CHANGELOG entry
* Improve WaitUntil timer precision
* When SendEvent is called during event closure, buffer events
* Fix resize lag when waiting in some situations
* Update send test and errors that broke some examples/APIs
* Improve clarity/fix typos in docs
* Fix unreachable panic after setting ControlFlow to Poll during some RedrawRequested events.
* Fix crash when running in release mode
* Remove crossbeam dependency and make drop events work again
* Remove serde implementations from ControlFlow
* Fix 1.24.1 build
* Fix freeze when setting decorations
* Replace &EventLoop in callback with &EventLoopWindowTarget
* Document and implement Debug for EventLoopWindowTarget
* Fix some deadlocks that could occur when changing window state
* Fix thread executor not executing closure when called from non-loop thread
* Fix buffered events not getting dispatched
* Fix crash with runner refcell not getting dropped
* Address review feedback
* Fix CHANGELOG typo
* Catch panics in user callback
2019-02-05 10:30:33 -05:00
Renamed from src/platform/windows/window_state.rs (Browse further)
