Enum Event
#[non_exhaustive]pub enum Event {
IconSize {
size: i32,
},
Done,
}wayland and Linux only.Variants (Non-exhaustive)§
This enum is marked as non-exhaustive
IconSize
describes a supported & preferred icon size
This event indicates an icon size the compositor prefers to be available if the client has scalable icons and can render to any size.
When the ‘xdg_toplevel_icon_manager_v1’ object is created, the compositor may send one or more ‘icon_size’ events to describe the list of preferred icon sizes. If the compositor has no size preference, it may not send any ‘icon_size’ event, and it is up to the client to decide a suitable icon size.
A sequence of ‘icon_size’ events must be finished with a ‘done’ event. If the compositor has no size preferences, it must still send the ‘done’ event, without any preceding ‘icon_size’ events.
Done
all information has been sent
This event is sent after all ‘icon_size’ events have been sent.
Implementations§
Trait Implementations§
Auto Trait Implementations§
impl Freeze for Event
impl RefUnwindSafe for Event
impl Send for Event
impl Sync for Event
impl Unpin for Event
impl UnwindSafe for Event
Blanket Implementations§
Source§impl<S, D, Swp, Dwp, T> AdaptInto<D, Swp, Dwp, T> for Swhere
T: Real + Zero + Arithmetics + Clone,
Swp: WhitePoint<T>,
Dwp: WhitePoint<T>,
D: AdaptFrom<S, Swp, Dwp, T>,
impl<S, D, Swp, Dwp, T> AdaptInto<D, Swp, Dwp, T> for Swhere
T: Real + Zero + Arithmetics + Clone,
Swp: WhitePoint<T>,
Dwp: WhitePoint<T>,
D: AdaptFrom<S, Swp, Dwp, T>,
Source§fn adapt_into_using<M>(self, method: M) -> Dwhere
M: TransformMatrix<T>,
fn adapt_into_using<M>(self, method: M) -> Dwhere
M: TransformMatrix<T>,
Source§fn adapt_into(self) -> D
fn adapt_into(self) -> D
§impl<T, Res> Apply<Res> for Twhere
T: ?Sized,
impl<T, Res> Apply<Res> for Twhere
T: ?Sized,
Source§impl<T, C> ArraysFrom<C> for Twhere
C: IntoArrays<T>,
impl<T, C> ArraysFrom<C> for Twhere
C: IntoArrays<T>,
Source§fn arrays_from(colors: C) -> T
fn arrays_from(colors: C) -> T
Source§impl<T, C> ArraysInto<C> for Twhere
C: FromArrays<T>,
impl<T, C> ArraysInto<C> for Twhere
C: FromArrays<T>,
Source§fn arrays_into(self) -> C
fn arrays_into(self) -> C
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<WpParam, T, U> Cam16IntoUnclamped<WpParam, T> for Uwhere
T: FromCam16Unclamped<WpParam, U>,
impl<WpParam, T, U> Cam16IntoUnclamped<WpParam, T> for Uwhere
T: FromCam16Unclamped<WpParam, U>,
Source§type Scalar = <T as FromCam16Unclamped<WpParam, U>>::Scalar
type Scalar = <T as FromCam16Unclamped<WpParam, U>>::Scalar
parameters when converting.Source§fn cam16_into_unclamped(
self,
parameters: BakedParameters<WpParam, <U as Cam16IntoUnclamped<WpParam, T>>::Scalar>,
) -> T
fn cam16_into_unclamped( self, parameters: BakedParameters<WpParam, <U as Cam16IntoUnclamped<WpParam, T>>::Scalar>, ) -> T
self into C, using the provided parameters.Source§impl<T, C> ComponentsFrom<C> for Twhere
C: IntoComponents<T>,
impl<T, C> ComponentsFrom<C> for Twhere
C: IntoComponents<T>,
Source§fn components_from(colors: C) -> T
fn components_from(colors: C) -> T
§impl<T> Downcast for Twhere
T: Any,
impl<T> Downcast for Twhere
T: Any,
§fn into_any(self: Box<T>) -> Box<dyn Any>
fn into_any(self: Box<T>) -> Box<dyn Any>
Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can
then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.§fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>
fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>
Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be
further downcast into Rc<ConcreteType> where ConcreteType implements Trait.§fn as_any(&self) -> &(dyn Any + 'static)
fn as_any(&self) -> &(dyn Any + 'static)
&Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot
generate &Any’s vtable from &Trait’s.§fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
&mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot
generate &mut Any’s vtable from &mut Trait’s.§impl<T> DowncastSync for T
impl<T> DowncastSync for T
Source§impl<T> FromAngle<T> for T
impl<T> FromAngle<T> for T
Source§fn from_angle(angle: T) -> T
fn from_angle(angle: T) -> T
angle.Source§impl<T, U> FromStimulus<U> for Twhere
U: IntoStimulus<T>,
impl<T, U> FromStimulus<U> for Twhere
U: IntoStimulus<T>,
Source§fn from_stimulus(other: U) -> T
fn from_stimulus(other: U) -> T
other into Self, while performing the appropriate scaling,
rounding and clamping.§impl<T> Instrument for T
impl<T> Instrument for T
§fn instrument(self, span: Span) -> Instrumented<Self> ⓘ
fn instrument(self, span: Span) -> Instrumented<Self> ⓘ
Source§impl<T, U> IntoAngle<U> for Twhere
U: FromAngle<T>,
impl<T, U> IntoAngle<U> for Twhere
U: FromAngle<T>,
Source§fn into_angle(self) -> U
fn into_angle(self) -> U
T.§impl<State, Message> IntoBoot<State, Message> for State
impl<State, Message> IntoBoot<State, Message> for State
§fn into_boot(self) -> (State, Task<Message>)
fn into_boot(self) -> (State, Task<Message>)
Application.Source§impl<WpParam, T, U> IntoCam16Unclamped<WpParam, T> for Uwhere
T: Cam16FromUnclamped<WpParam, U>,
impl<WpParam, T, U> IntoCam16Unclamped<WpParam, T> for Uwhere
T: Cam16FromUnclamped<WpParam, U>,
Source§type Scalar = <T as Cam16FromUnclamped<WpParam, U>>::Scalar
type Scalar = <T as Cam16FromUnclamped<WpParam, U>>::Scalar
parameters when converting.Source§fn into_cam16_unclamped(
self,
parameters: BakedParameters<WpParam, <U as IntoCam16Unclamped<WpParam, T>>::Scalar>,
) -> T
fn into_cam16_unclamped( self, parameters: BakedParameters<WpParam, <U as IntoCam16Unclamped<WpParam, T>>::Scalar>, ) -> T
self into C, using the provided parameters.Source§impl<T, U> IntoColor<U> for Twhere
U: FromColor<T>,
impl<T, U> IntoColor<U> for Twhere
U: FromColor<T>,
Source§fn into_color(self) -> U
fn into_color(self) -> U
Source§impl<T, U> IntoColorUnclamped<U> for Twhere
U: FromColorUnclamped<T>,
impl<T, U> IntoColorUnclamped<U> for Twhere
U: FromColorUnclamped<T>,
Source§fn into_color_unclamped(self) -> U
fn into_color_unclamped(self) -> U
Source§impl<T> IntoStimulus<T> for T
impl<T> IntoStimulus<T> for T
Source§fn into_stimulus(self) -> T
fn into_stimulus(self) -> T
self into T, while performing the appropriate scaling,
rounding and clamping.Source§impl<T, C> TryComponentsInto<C> for Twhere
C: TryFromComponents<T>,
impl<T, C> TryComponentsInto<C> for Twhere
C: TryFromComponents<T>,
Source§type Error = <C as TryFromComponents<T>>::Error
type Error = <C as TryFromComponents<T>>::Error
try_into_colors fails to cast.Source§fn try_components_into(self) -> Result<C, <T as TryComponentsInto<C>>::Error>
fn try_components_into(self) -> Result<C, <T as TryComponentsInto<C>>::Error>
Source§impl<T, U> TryIntoColor<U> for Twhere
U: TryFromColor<T>,
impl<T, U> TryIntoColor<U> for Twhere
U: TryFromColor<T>,
Source§fn try_into_color(self) -> Result<U, OutOfBounds<U>>
fn try_into_color(self) -> Result<U, OutOfBounds<U>>
OutOfBounds error is returned which contains
the unclamped color. Read more