Enum Request
#[non_exhaustive]pub enum Request {
Destroy,
GetXdgToplevelDrag {
id: New<XdgToplevelDragV1>,
data_source: WlDataSource,
},
}wayland and Linux only.Variants (Non-exhaustive)§
This enum is marked as non-exhaustive
Destroy
destroy the xdg_toplevel_drag_manager_v1 object
Destroy this xdg_toplevel_drag_manager_v1 object. Other objects, including xdg_toplevel_drag_v1 objects created by this factory, are not affected by this request.
This is a destructor, once received this object cannot be used any longer.
GetXdgToplevelDrag
get an xdg_toplevel_drag for a wl_data_source
Create an xdg_toplevel_drag for a drag and drop operation that is going to be started with data_source.
This request can only be made on sources used in drag-and-drop, so it must be performed before wl_data_device.start_drag. Attempting to use the source other than for drag-and-drop such as in wl_data_device.set_selection will raise an invalid_source error.
Destroying data_source while a toplevel is attached to the xdg_toplevel_drag is undefined.
Implementations§
Trait Implementations§
Auto Trait Implementations§
impl Freeze for Request
impl !RefUnwindSafe for Request
impl Send for Request
impl Sync for Request
impl Unpin for Request
impl !UnwindSafe for Request
Blanket Implementations§
Source§impl<S, D, Swp, Dwp, T> AdaptInto<D, Swp, Dwp, T> for Swhere
T: Real + Zero + Arithmetics + Clone,
Swp: WhitePoint<T>,
Dwp: WhitePoint<T>,
D: AdaptFrom<S, Swp, Dwp, T>,
impl<S, D, Swp, Dwp, T> AdaptInto<D, Swp, Dwp, T> for Swhere
T: Real + Zero + Arithmetics + Clone,
Swp: WhitePoint<T>,
Dwp: WhitePoint<T>,
D: AdaptFrom<S, Swp, Dwp, T>,
Source§fn adapt_into_using<M>(self, method: M) -> Dwhere
M: TransformMatrix<T>,
fn adapt_into_using<M>(self, method: M) -> Dwhere
M: TransformMatrix<T>,
Source§fn adapt_into(self) -> D
fn adapt_into(self) -> D
§impl<T, Res> Apply<Res> for Twhere
T: ?Sized,
impl<T, Res> Apply<Res> for Twhere
T: ?Sized,
Source§impl<T, C> ArraysFrom<C> for Twhere
C: IntoArrays<T>,
impl<T, C> ArraysFrom<C> for Twhere
C: IntoArrays<T>,
Source§fn arrays_from(colors: C) -> T
fn arrays_from(colors: C) -> T
Source§impl<T, C> ArraysInto<C> for Twhere
C: FromArrays<T>,
impl<T, C> ArraysInto<C> for Twhere
C: FromArrays<T>,
Source§fn arrays_into(self) -> C
fn arrays_into(self) -> C
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<WpParam, T, U> Cam16IntoUnclamped<WpParam, T> for Uwhere
T: FromCam16Unclamped<WpParam, U>,
impl<WpParam, T, U> Cam16IntoUnclamped<WpParam, T> for Uwhere
T: FromCam16Unclamped<WpParam, U>,
Source§type Scalar = <T as FromCam16Unclamped<WpParam, U>>::Scalar
type Scalar = <T as FromCam16Unclamped<WpParam, U>>::Scalar
parameters when converting.Source§fn cam16_into_unclamped(
self,
parameters: BakedParameters<WpParam, <U as Cam16IntoUnclamped<WpParam, T>>::Scalar>,
) -> T
fn cam16_into_unclamped( self, parameters: BakedParameters<WpParam, <U as Cam16IntoUnclamped<WpParam, T>>::Scalar>, ) -> T
self into C, using the provided parameters.Source§impl<T, C> ComponentsFrom<C> for Twhere
C: IntoComponents<T>,
impl<T, C> ComponentsFrom<C> for Twhere
C: IntoComponents<T>,
Source§fn components_from(colors: C) -> T
fn components_from(colors: C) -> T
§impl<T> Downcast for Twhere
T: Any,
impl<T> Downcast for Twhere
T: Any,
§fn into_any(self: Box<T>) -> Box<dyn Any>
fn into_any(self: Box<T>) -> Box<dyn Any>
Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can
then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.§fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>
fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>
Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be
further downcast into Rc<ConcreteType> where ConcreteType implements Trait.§fn as_any(&self) -> &(dyn Any + 'static)
fn as_any(&self) -> &(dyn Any + 'static)
&Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot
generate &Any’s vtable from &Trait’s.§fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
&mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot
generate &mut Any’s vtable from &mut Trait’s.§impl<T> DowncastSync for T
impl<T> DowncastSync for T
Source§impl<T> FromAngle<T> for T
impl<T> FromAngle<T> for T
Source§fn from_angle(angle: T) -> T
fn from_angle(angle: T) -> T
angle.Source§impl<T, U> FromStimulus<U> for Twhere
U: IntoStimulus<T>,
impl<T, U> FromStimulus<U> for Twhere
U: IntoStimulus<T>,
Source§fn from_stimulus(other: U) -> T
fn from_stimulus(other: U) -> T
other into Self, while performing the appropriate scaling,
rounding and clamping.§impl<T> Instrument for T
impl<T> Instrument for T
§fn instrument(self, span: Span) -> Instrumented<Self> ⓘ
fn instrument(self, span: Span) -> Instrumented<Self> ⓘ
Source§impl<T, U> IntoAngle<U> for Twhere
U: FromAngle<T>,
impl<T, U> IntoAngle<U> for Twhere
U: FromAngle<T>,
Source§fn into_angle(self) -> U
fn into_angle(self) -> U
T.§impl<State, Message> IntoBoot<State, Message> for State
impl<State, Message> IntoBoot<State, Message> for State
§fn into_boot(self) -> (State, Task<Message>)
fn into_boot(self) -> (State, Task<Message>)
Application.Source§impl<WpParam, T, U> IntoCam16Unclamped<WpParam, T> for Uwhere
T: Cam16FromUnclamped<WpParam, U>,
impl<WpParam, T, U> IntoCam16Unclamped<WpParam, T> for Uwhere
T: Cam16FromUnclamped<WpParam, U>,
Source§type Scalar = <T as Cam16FromUnclamped<WpParam, U>>::Scalar
type Scalar = <T as Cam16FromUnclamped<WpParam, U>>::Scalar
parameters when converting.Source§fn into_cam16_unclamped(
self,
parameters: BakedParameters<WpParam, <U as IntoCam16Unclamped<WpParam, T>>::Scalar>,
) -> T
fn into_cam16_unclamped( self, parameters: BakedParameters<WpParam, <U as IntoCam16Unclamped<WpParam, T>>::Scalar>, ) -> T
self into C, using the provided parameters.Source§impl<T, U> IntoColor<U> for Twhere
U: FromColor<T>,
impl<T, U> IntoColor<U> for Twhere
U: FromColor<T>,
Source§fn into_color(self) -> U
fn into_color(self) -> U
Source§impl<T, U> IntoColorUnclamped<U> for Twhere
U: FromColorUnclamped<T>,
impl<T, U> IntoColorUnclamped<U> for Twhere
U: FromColorUnclamped<T>,
Source§fn into_color_unclamped(self) -> U
fn into_color_unclamped(self) -> U
Source§impl<T> IntoStimulus<T> for T
impl<T> IntoStimulus<T> for T
Source§fn into_stimulus(self) -> T
fn into_stimulus(self) -> T
self into T, while performing the appropriate scaling,
rounding and clamping.Source§impl<T, C> TryComponentsInto<C> for Twhere
C: TryFromComponents<T>,
impl<T, C> TryComponentsInto<C> for Twhere
C: TryFromComponents<T>,
Source§type Error = <C as TryFromComponents<T>>::Error
type Error = <C as TryFromComponents<T>>::Error
try_into_colors fails to cast.Source§fn try_components_into(self) -> Result<C, <T as TryComponentsInto<C>>::Error>
fn try_components_into(self) -> Result<C, <T as TryComponentsInto<C>>::Error>
Source§impl<T, U> TryIntoColor<U> for Twhere
U: TryFromColor<T>,
impl<T, U> TryIntoColor<U> for Twhere
U: TryFromColor<T>,
Source§fn try_into_color(self) -> Result<U, OutOfBounds<U>>
fn try_into_color(self) -> Result<U, OutOfBounds<U>>
OutOfBounds error is returned which contains
the unclamped color. Read more