Add more NM bindings

networkmanager/src/interface/access_point.rs

@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: MPL-2.0
+//! # DBus interface proxy for: `org.freedesktop.NetworkManager.AccessPoint`
+//!
+//! This code was generated by `zbus-xmlgen` `2.0.0` from DBus introspection data.
+//! Source: `Interface '/org/freedesktop/NetworkManager/AccessPoint/383' from service 'org.freedesktop.NetworkManager' on system bus`.
+//!
+//! You may prefer to adapt it, instead of using it verbatim.
+//!
+//! More information can be found in the
+//! [Writing a client proxy](https://dbus.pages.freedesktop.org/zbus/client.html)
+//! section of the zbus documentation.
+//!
+//! This DBus object implements
+//! [standard DBus interfaces](https://dbus.freedesktop.org/doc/dbus-specification.html),
+//! (`org.freedesktop.DBus.*`) for which the following zbus proxies can be used:
+//!
+//! * [`zbus::fdo::PropertiesProxy`]
+//! * [`zbus::fdo::IntrospectableProxy`]
+//! * [`zbus::fdo::PeerProxy`]
+//!
+//! …consequently `zbus-xmlgen` did not generate code for the above interfaces.
+
+use zbus::dbus_proxy;
+
+#[dbus_proxy(interface = "org.freedesktop.NetworkManager.AccessPoint")]
+trait AccessPoint {
+	/// Flags property
+	#[dbus_proxy(property)]
+	fn flags(&self) -> zbus::Result<u32>;
+
+	/// Frequency property
+	#[dbus_proxy(property)]
+	fn frequency(&self) -> zbus::Result<u32>;
+
+	/// HwAddress property
+	#[dbus_proxy(property)]
+	fn hw_address(&self) -> zbus::Result<String>;
+
+	/// LastSeen property
+	#[dbus_proxy(property)]
+	fn last_seen(&self) -> zbus::Result<i32>;
+
+	/// MaxBitrate property
+	#[dbus_proxy(property)]
+	fn max_bitrate(&self) -> zbus::Result<u32>;
+
+	/// Mode property
+	#[dbus_proxy(property)]
+	fn mode(&self) -> zbus::Result<u32>;
+
+	/// RsnFlags property
+	#[dbus_proxy(property)]
+	fn rsn_flags(&self) -> zbus::Result<u32>;
+
+	/// Ssid property
+	#[dbus_proxy(property)]
+	fn ssid(&self) -> zbus::Result<Vec<u8>>;
+
+	/// Strength property
+	#[dbus_proxy(property)]
+	fn strength(&self) -> zbus::Result<u8>;
+
+	/// WpaFlags property
+	#[dbus_proxy(property)]
+	fn wpa_flags(&self) -> zbus::Result<u32>;
+}

networkmanager/src/interface/config.rs

@@ -0,0 +1,3 @@
+// SPDX-License-Identifier: MPL-2.0
+pub mod ip4;
+pub mod ip6;

networkmanager/src/interface/config/ip4.rs

@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: MPL-2.0
+//! # DBus interface proxy for: `org.freedesktop.NetworkManager.IP4Config`
+//!
+//! This code was generated by `zbus-xmlgen` `2.0.0` from DBus introspection data.
+//! Source: `Interface '/org/freedesktop/NetworkManager/IP4Config/3' from service 'org.freedesktop.NetworkManager' on system bus`.
+//!
+//! You may prefer to adapt it, instead of using it verbatim.
+//!
+//! More information can be found in the
+//! [Writing a client proxy](https://dbus.pages.freedesktop.org/zbus/client.html)
+//! section of the zbus documentation.
+//!
+//! This DBus object implements
+//! [standard DBus interfaces](https://dbus.freedesktop.org/doc/dbus-specification.html),
+//! (`org.freedesktop.DBus.*`) for which the following zbus proxies can be used:
+//!
+//! * [`zbus::fdo::PropertiesProxy`]
+//! * [`zbus::fdo::IntrospectableProxy`]
+//! * [`zbus::fdo::PeerProxy`]
+//!
+//! …consequently `zbus-xmlgen` did not generate code for the above interfaces.
+
+use zbus::dbus_proxy;
+
+#[dbus_proxy(interface = "org.freedesktop.NetworkManager.IP4Config")]
+pub trait IP4Config {
+	/// AddressData property
+	#[dbus_proxy(property)]
+	fn address_data(
+		&self,
+	) -> zbus::Result<Vec<std::collections::HashMap<String, zbus::zvariant::OwnedValue>>>;
+
+	/// Addresses property
+	#[dbus_proxy(property)]
+	fn addresses(&self) -> zbus::Result<Vec<Vec<u32>>>;
+
+	/// DnsOptions property
+	#[dbus_proxy(property)]
+	fn dns_options(&self) -> zbus::Result<Vec<String>>;
+
+	/// DnsPriority property
+	#[dbus_proxy(property)]
+	fn dns_priority(&self) -> zbus::Result<i32>;
+
+	/// Domains property
+	#[dbus_proxy(property)]
+	fn domains(&self) -> zbus::Result<Vec<String>>;
+
+	/// Gateway property
+	#[dbus_proxy(property)]
+	fn gateway(&self) -> zbus::Result<String>;
+
+	/// NameserverData property
+	#[dbus_proxy(property)]
+	fn nameserver_data(
+		&self,
+	) -> zbus::Result<Vec<std::collections::HashMap<String, zbus::zvariant::OwnedValue>>>;
+
+	/// Nameservers property
+	#[dbus_proxy(property)]
+	fn nameservers(&self) -> zbus::Result<Vec<u32>>;
+
+	/// RouteData property
+	#[dbus_proxy(property)]
+	fn route_data(
+		&self,
+	) -> zbus::Result<Vec<std::collections::HashMap<String, zbus::zvariant::OwnedValue>>>;
+
+	/// Routes property
+	#[dbus_proxy(property)]
+	fn routes(&self) -> zbus::Result<Vec<Vec<u32>>>;
+
+	/// Searches property
+	#[dbus_proxy(property)]
+	fn searches(&self) -> zbus::Result<Vec<String>>;
+
+	/// WinsServerData property
+	#[dbus_proxy(property)]
+	fn wins_server_data(&self) -> zbus::Result<Vec<String>>;
+
+	/// WinsServers property
+	#[dbus_proxy(property)]
+	fn wins_servers(&self) -> zbus::Result<Vec<u32>>;
+}

networkmanager/src/interface/config/ip6.rs

@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: MPL-2.0
+//! # DBus interface proxy for: `org.freedesktop.NetworkManager.IP6Config`
+//!
+//! This code was generated by `zbus-xmlgen` `2.0.0` from DBus introspection data.
+//! Source: `Interface '/org/freedesktop/NetworkManager/IP6Config/3' from service 'org.freedesktop.NetworkManager' on system bus`.
+//!
+//! You may prefer to adapt it, instead of using it verbatim.
+//!
+//! More information can be found in the
+//! [Writing a client proxy](https://dbus.pages.freedesktop.org/zbus/client.html)
+//! section of the zbus documentation.
+//!
+//! This DBus object implements
+//! [standard DBus interfaces](https://dbus.freedesktop.org/doc/dbus-specification.html),
+//! (`org.freedesktop.DBus.*`) for which the following zbus proxies can be used:
+//!
+//! * [`zbus::fdo::PropertiesProxy`]
+//! * [`zbus::fdo::IntrospectableProxy`]
+//! * [`zbus::fdo::PeerProxy`]
+//!
+//! …consequently `zbus-xmlgen` did not generate code for the above interfaces.
+
+use zbus::dbus_proxy;
+
+#[dbus_proxy(interface = "org.freedesktop.NetworkManager.IP6Config")]
+pub trait IP6Config {
+	/// AddressData property
+	#[dbus_proxy(property)]
+	fn address_data(
+		&self,
+	) -> zbus::Result<Vec<std::collections::HashMap<String, zbus::zvariant::OwnedValue>>>;
+
+	/// Addresses property
+	#[dbus_proxy(property)]
+	fn addresses(&self) -> zbus::Result<Vec<(Vec<u8>, u32, Vec<u8>)>>;
+
+	/// DnsOptions property
+	#[dbus_proxy(property)]
+	fn dns_options(&self) -> zbus::Result<Vec<String>>;
+
+	/// DnsPriority property
+	#[dbus_proxy(property)]
+	fn dns_priority(&self) -> zbus::Result<i32>;
+
+	/// Domains property
+	#[dbus_proxy(property)]
+	fn domains(&self) -> zbus::Result<Vec<String>>;
+
+	/// Gateway property
+	#[dbus_proxy(property)]
+	fn gateway(&self) -> zbus::Result<String>;
+
+	/// Nameservers property
+	#[dbus_proxy(property)]
+	fn nameservers(&self) -> zbus::Result<Vec<Vec<u8>>>;
+
+	/// RouteData property
+	#[dbus_proxy(property)]
+	fn route_data(
+		&self,
+	) -> zbus::Result<Vec<std::collections::HashMap<String, zbus::zvariant::OwnedValue>>>;
+
+	/// Routes property
+	#[dbus_proxy(property)]
+	fn routes(&self) -> zbus::Result<Vec<(Vec<u8>, u32, Vec<u8>, u32)>>;
+
+	/// Searches property
+	#[dbus_proxy(property)]
+	fn searches(&self) -> zbus::Result<Vec<String>>;
+}

networkmanager/src/interface/device.rs

@@ -20,6 +20,9 @@
 //!
 //! …consequently `zbus-xmlgen` did not generate code for the above interfaces.
 
+pub mod wired;
+pub mod wireless;
+
 use zbus::dbus_proxy;
 
 #[dbus_proxy(interface = "org.freedesktop.NetworkManager.Device.Statistics")]

networkmanager/src/interface/device/wired.rs

@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: MPL-2.0
+//! # DBus interface proxies for: `org.freedesktop.NetworkManager.Device.Wired`
+//!
+//! This code was generated by `zbus-xmlgen` `2.0.0` from DBus introspection data.
+//! Source: `Interface '/org/freedesktop/NetworkManager/Devices/2' from service 'org.freedesktop.NetworkManager' on system bus`.
+//!
+//! You may prefer to adapt it, instead of using it verbatim.
+//!
+//! More information can be found in the
+//! [Writing a client proxy](https://dbus.pages.freedesktop.org/zbus/client.html)
+//! section of the zbus documentation.
+//!
+//! This DBus object implements
+//! [standard DBus interfaces](https://dbus.freedesktop.org/doc/dbus-specification.html),
+//! (`org.freedesktop.DBus.*`) for which the following zbus proxies can be used:
+//!
+//! * [`zbus::fdo::PropertiesProxy`]
+//! * [`zbus::fdo::IntrospectableProxy`]
+//! * [`zbus::fdo::PeerProxy`]
+//!
+//! …consequently `zbus-xmlgen` did not generate code for the above interfaces.
+
+use zbus::dbus_proxy;
+
+#[dbus_proxy(interface = "org.freedesktop.NetworkManager.Device")]
+pub trait Device {
+	/// Delete method
+	fn delete(&self) -> zbus::Result<()>;
+
+	/// Disconnect method
+	fn disconnect(&self) -> zbus::Result<()>;
+
+	/// GetAppliedConnection method
+	fn get_applied_connection(
+		&self,
+		flags: u32,
+	) -> zbus::Result<(
+		std::collections::HashMap<
+			String,
+			std::collections::HashMap<String, zbus::zvariant::OwnedValue>,
+		>,
+		u64,
+	)>;
+
+	/// Reapply method
+	fn reapply(
+		&self,
+		connection: std::collections::HashMap<
+			&str,
+			std::collections::HashMap<&str, zbus::zvariant::Value<'_>>,
+		>,
+		version_id: u64,
+		flags: u32,
+	) -> zbus::Result<()>;
+
+	/// ActiveConnection property
+	#[dbus_proxy(property)]
+	fn active_connection(&self) -> zbus::Result<zbus::zvariant::OwnedObjectPath>;
+
+	/// Autoconnect property
+	#[dbus_proxy(property)]
+	fn autoconnect(&self) -> zbus::Result<bool>;
+	#[dbus_proxy(property)]
+	fn set_autoconnect(&self, value: bool) -> zbus::Result<()>;
+
+	/// AvailableConnections property
+	#[dbus_proxy(property)]
+	fn available_connections(&self) -> zbus::Result<Vec<zbus::zvariant::OwnedObjectPath>>;
+
+	/// Capabilities property
+	#[dbus_proxy(property)]
+	fn capabilities(&self) -> zbus::Result<u32>;
+
+	/// DeviceType property
+	#[dbus_proxy(property)]
+	fn device_type(&self) -> zbus::Result<u32>;
+
+	/// Dhcp4Config property
+	#[dbus_proxy(property)]
+	fn dhcp4_config(&self) -> zbus::Result<zbus::zvariant::OwnedObjectPath>;
+
+	/// Dhcp6Config property
+	#[dbus_proxy(property)]
+	fn dhcp6_config(&self) -> zbus::Result<zbus::zvariant::OwnedObjectPath>;
+
+	/// Driver property
+	#[dbus_proxy(property)]
+	fn driver(&self) -> zbus::Result<String>;
+
+	/// DriverVersion property
+	#[dbus_proxy(property)]
+	fn driver_version(&self) -> zbus::Result<String>;
+
+	/// FirmwareMissing property
+	#[dbus_proxy(property)]
+	fn firmware_missing(&self) -> zbus::Result<bool>;
+
+	/// FirmwareVersion property
+	#[dbus_proxy(property)]
+	fn firmware_version(&self) -> zbus::Result<String>;
+
+	/// HwAddress property
+	#[dbus_proxy(property)]
+	fn hw_address(&self) -> zbus::Result<String>;
+
+	/// Interface property
+	#[dbus_proxy(property)]
+	fn interface(&self) -> zbus::Result<String>;
+
+	/// InterfaceFlags property
+	#[dbus_proxy(property)]
+	fn interface_flags(&self) -> zbus::Result<u32>;
+
+	/// Ip4Address property
+	#[dbus_proxy(property)]
+	fn ip4_address(&self) -> zbus::Result<u32>;
+
+	/// Ip4Config property
+	#[dbus_proxy(property)]
+	fn ip4_config(&self) -> zbus::Result<zbus::zvariant::OwnedObjectPath>;
+
+	/// Ip4Connectivity property
+	#[dbus_proxy(property)]
+	fn ip4_connectivity(&self) -> zbus::Result<u32>;
+
+	/// Ip6Config property
+	#[dbus_proxy(property)]
+	fn ip6_config(&self) -> zbus::Result<zbus::zvariant::OwnedObjectPath>;
+
+	/// Ip6Connectivity property
+	#[dbus_proxy(property)]
+	fn ip6_connectivity(&self) -> zbus::Result<u32>;
+
+	/// IpInterface property
+	#[dbus_proxy(property)]
+	fn ip_interface(&self) -> zbus::Result<String>;
+
+	/// LldpNeighbors property
+	#[dbus_proxy(property)]
+	fn lldp_neighbors(
+		&self,
+	) -> zbus::Result<Vec<std::collections::HashMap<String, zbus::zvariant::OwnedValue>>>;
+
+	/// Managed property
+	#[dbus_proxy(property)]
+	fn managed(&self) -> zbus::Result<bool>;
+	#[dbus_proxy(property)]
+	fn set_managed(&self, value: bool) -> zbus::Result<()>;
+
+	/// Metered property
+	#[dbus_proxy(property)]
+	fn metered(&self) -> zbus::Result<u32>;
+
+	/// Mtu property
+	#[dbus_proxy(property)]
+	fn mtu(&self) -> zbus::Result<u32>;
+
+	/// NmPluginMissing property
+	#[dbus_proxy(property)]
+	fn nm_plugin_missing(&self) -> zbus::Result<bool>;
+
+	/// Path property
+	#[dbus_proxy(property)]
+	fn path(&self) -> zbus::Result<String>;
+
+	/// PhysicalPortId property
+	#[dbus_proxy(property)]
+	fn physical_port_id(&self) -> zbus::Result<String>;
+
+	/// Real property
+	#[dbus_proxy(property)]
+	fn real(&self) -> zbus::Result<bool>;
+
+	/// State property
+	#[dbus_proxy(property)]
+	fn state(&self) -> zbus::Result<u32>;
+
+	/// StateReason property
+	#[dbus_proxy(property)]
+	fn state_reason(&self) -> zbus::Result<(u32, u32)>;
+
+	/// Udi property
+	#[dbus_proxy(property)]
+	fn udi(&self) -> zbus::Result<String>;
+}
+
+#[dbus_proxy(interface = "org.freedesktop.NetworkManager.Device.Wired")]
+trait Wired {
+	/// Carrier property
+	#[dbus_proxy(property)]
+	fn carrier(&self) -> zbus::Result<bool>;
+
+	/// HwAddress property
+	#[dbus_proxy(property)]
+	fn hw_address(&self) -> zbus::Result<String>;
+
+	/// PermHwAddress property
+	#[dbus_proxy(property)]
+	fn perm_hw_address(&self) -> zbus::Result<String>;
+
+	/// S390Subchannels property
+	#[dbus_proxy(property)]
+	fn s390subchannels(&self) -> zbus::Result<Vec<String>>;
+
+	/// Speed property
+	#[dbus_proxy(property)]
+	fn speed(&self) -> zbus::Result<u32>;
+}

networkmanager/src/interface/device/wireless.rs

@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: MPL-2.0
+//! # DBus interface proxies for: `org.freedesktop.NetworkManager.Device.Wireless`
+//!
+//! This code was generated by `zbus-xmlgen` `2.0.0` from DBus introspection data.
+//! Source: `Interface '/org/freedesktop/NetworkManager/Devices/3' from service 'org.freedesktop.NetworkManager' on system bus`.
+//!
+//! You may prefer to adapt it, instead of using it verbatim.
+//!
+//! More information can be found in the
+//! [Writing a client proxy](https://dbus.pages.freedesktop.org/zbus/client.html)
+//! section of the zbus documentation.
+//!
+//! This DBus object implements
+//! [standard DBus interfaces](https://dbus.freedesktop.org/doc/dbus-specification.html),
+//! (`org.freedesktop.DBus.*`) for which the following zbus proxies can be used:
+//!
+//! * [`zbus::fdo::PropertiesProxy`]
+//! * [`zbus::fdo::IntrospectableProxy`]
+//! * [`zbus::fdo::PeerProxy`]
+//!
+//! …consequently `zbus-xmlgen` did not generate code for the above interfaces.
+
+use zbus::dbus_proxy;
+
+#[dbus_proxy(interface = "org.freedesktop.NetworkManager.Device.Wireless")]
+pub trait Wireless {
+	/// GetAccessPoints method
+	fn get_access_points(&self) -> zbus::Result<Vec<zbus::zvariant::OwnedObjectPath>>;
+
+	/// GetAllAccessPoints method
+	fn get_all_access_points(&self) -> zbus::Result<Vec<zbus::zvariant::OwnedObjectPath>>;
+
+	/// RequestScan method
+	fn request_scan(
+		&self,
+		options: std::collections::HashMap<&str, zbus::zvariant::Value<'_>>,
+	) -> zbus::Result<()>;
+
+	/// AccessPointAdded signal
+	#[dbus_proxy(signal)]
+	fn access_point_added(&self, access_point: zbus::zvariant::ObjectPath<'_>) -> zbus::Result<()>;
+
+	/// AccessPointRemoved signal
+	#[dbus_proxy(signal)]
+	fn access_point_removed(
+		&self,
+		access_point: zbus::zvariant::ObjectPath<'_>,
+	) -> zbus::Result<()>;
+
+	/// AccessPoints property
+	#[dbus_proxy(property)]
+	fn access_points(&self) -> zbus::Result<Vec<zbus::zvariant::OwnedObjectPath>>;
+
+	/// ActiveAccessPoint property
+	#[dbus_proxy(property)]
+	fn active_access_point(&self) -> zbus::Result<zbus::zvariant::OwnedObjectPath>;
+
+	/// Bitrate property
+	#[dbus_proxy(property)]
+	fn bitrate(&self) -> zbus::Result<u32>;
+
+	/// HwAddress property
+	#[dbus_proxy(property)]
+	fn hw_address(&self) -> zbus::Result<String>;
+
+	/// LastScan property
+	#[dbus_proxy(property)]
+	fn last_scan(&self) -> zbus::Result<i64>;
+
+	/// Mode property
+	#[dbus_proxy(property)]
+	fn mode(&self) -> zbus::Result<u32>;
+
+	/// PermHwAddress property
+	#[dbus_proxy(property)]
+	fn perm_hw_address(&self) -> zbus::Result<String>;
+
+	/// WirelessCapabilities property
+	#[dbus_proxy(property)]
+	fn wireless_capabilities(&self) -> zbus::Result<u32>;
+}

networkmanager/src/interface/mod.rs

@@ -20,8 +20,11 @@
 //!
 //! …consequently `zbus-xmlgen` did not generate code for the above interfaces.
 
+pub mod access_point;
+pub mod config;
 pub mod device;
 pub mod settings;
+pub mod statistics;
 
 use zbus::dbus_proxy;
 

networkmanager/src/interface/statistics.rs

@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: MPL-2.0
+//! # DBus interface proxies for: `org.freedesktop.NetworkManager.Device.Statistics`
+//!
+//! This code was generated by `zbus-xmlgen` `2.0.0` from DBus introspection data.
+//! Source: `Interface '/org/freedesktop/NetworkManager/Devices/3' from service 'org.freedesktop.NetworkManager' on system bus`.
+//!
+//! You may prefer to adapt it, instead of using it verbatim.
+//!
+//! More information can be found in the
+//! [Writing a client proxy](https://dbus.pages.freedesktop.org/zbus/client.html)
+//! section of the zbus documentation.
+//!
+//! This DBus object implements
+//! [standard DBus interfaces](https://dbus.freedesktop.org/doc/dbus-specification.html),
+//! (`org.freedesktop.DBus.*`) for which the following zbus proxies can be used:
+//!
+//! * [`zbus::fdo::PropertiesProxy`]
+//! * [`zbus::fdo::IntrospectableProxy`]
+//! * [`zbus::fdo::PeerProxy`]
+//!
+//! …consequently `zbus-xmlgen` did not generate code for the above interfaces.
+
+use zbus::dbus_proxy;
+
+#[dbus_proxy(interface = "org.freedesktop.NetworkManager.Device.Statistics")]
+pub trait Statistics {
+	/// RefreshRateMs property
+	#[dbus_proxy(property)]
+	fn refresh_rate_ms(&self) -> zbus::Result<u32>;
+	#[dbus_proxy(property)]
+	fn set_refresh_rate_ms(&self, value: u32) -> zbus::Result<()>;
+
+	/// RxBytes property
+	#[dbus_proxy(property)]
+	fn rx_bytes(&self) -> zbus::Result<u64>;
+
+	/// TxBytes property
+	#[dbus_proxy(property)]
+	fn tx_bytes(&self) -> zbus::Result<u64>;
+}